- Home
- 제품
- ►
- 컨트롤 그리고 컨넥티비티
- ►
- basicDIM
- ►
- Sensor and application controller
- ►
- basicDIM ILD G2 SFI 20 16DPI WH
basicDIM ILD G2 16DPI WH
Kompaktes Steuermodul mit Umgebungslicht- und Bewegungssensor
- For up to 64 DALI drivers, expandable with DALI-2 Input Devices (see data sheet 3.1 Wiring)
- Integrated application controller
- Flexible configuration via companionSUITE
- 2 DALI groups with adjustable offset
- Monitoring of ambient light and motion detection
- Infrared remote control for configuration and operation
- Individual adjustment of the parameters
- Power supply via DALI line
- Mounting ring and gasket included to reach IP65 protection
- 보호 등급 I 및 보호 등급 II 조명 기구용
- Wide range of accessories allowing extended application range
- 5 years guarantee (conditions at www.tridonic.com)
- 케이싱: 폴리카보네이트, 백색
- Type of protection up to IP65
Ordering data | ||||
---|---|---|---|---|
유형 | 품목 번호 | 적합 용도 | 패키징, 카턴 | 개당 무게 |
basicDIM ILD G2 SFI 20 16DPI WH | 28003393 | 조명 기구 설치 | 10 pc(s). | 0,105 |
- Approval marks:
-
-
-
-
-
Technical data | |
---|---|
~를 통한 공급 | DALI cable |
Supply voltage (1) | 11,5 – 20,5 V |
Current consumption (no LED) | max. 11 mA |
Current consumption (with LED) | max. 12 mA |
Mounting height (2) | 8 – 18 m |
Adjustment range position “low” | 8 – 12 m |
Adjustment range position “high” (2) | 12 – 18 m |
Mounting opening | 70 x 83 mm |
Hosuing thickness of the luminaire | 0,75 – 4 mm |
Detection angle for PIR detection angle “low” | 72° |
Detection angle for PIR detection angle “high” | 60° |
Detection range for light measurement (3) | 1 – 2.000 lx |
Min. temperature difference between ambient temperature and detected object | ± 4 °C |
주위 온도 ta | -20 ... +50 °C |
tc 포인트 | 60 °C |
보관 온도 ts | -25 ... +60 °C |
치수 L x W x H | 99,3 x 86,3 x 46,5 mm |
Housing material body | PC polycarbonate |
Housing material lens | PE polyethylene |
Housing colour body | White (similar to RAL 9010) |
Housing colour lens | 백색 |
Type of installation | 조명 기구 설치 |
보호 유형 (4) | Up to IP65 |
- (1) 14 – 20.5 V if use PBI1. Uin according to IEC 62386-101.
- (2) For mounting height higher than 16 m it is recommended to use several sensors grouped together in one occupancy group. As the sensitivity for the detection diameter can not be guaranteed for high over 16 m.
- (3) The measured value at the sensor head corresponds to approx. 5 to 10,000 lux on the surface measured.
- (4) Depending on the installation type up to IP 65 for more details see data sheet chapter 3.1.
Certificates / declarations of conformity | ||
Type | Article number | 인증서 |
---|---|---|
인증서 () |
REMOTECONTROL IR6 Accessories
- 옵션 적외선 리모컨
- 켜기 및 끄기(On/Off 버튼)
- 조광(강하게/약하게 버튼)
- 자동 조광 활성화(자동 버튼)
- 임계값 제어점 설정(설정 버튼)
- IR range up to 20 m
Ordering data | ||||
---|---|---|---|---|
유형 | 품목 번호 | 치수 L x W x H | 패키징, 카턴 | 개당 무게 |
REMOTECONTOL IR6 | 28000647 | 86,5 x 40,5 x 7,2 mm | 500 pc(s). | 0,019 |
basicDIM ILD G2 Programmer Accessories
- Approval marks:
-
-
-
-
- Optional infra-red programming unit for basicDIM ILD G2
- Setting of predefined parameter values
- Programmable functions such as light level, time delay, P.I.R., bright-out, power up and grouping
- IR range up to 20 m
Ordering data | |||
---|---|---|---|
유형 | 품목 번호 | 패키징, 카턴 | 개당 무게 |
basicDIM ILD G2 PROGRAMMER | 28003484 | 150 pc(s). | 0,04 |
Shading Set Accessories
- Shading set consisting of 3 different types of lenses
- Three different covers for the MSensor G3 SFI 30 PIR 16DPI WH, basicDIM ILD G2 and basicDIM ILD give the ability to reduce the detection area in aisle applications
- These covers can be attached or removed from/to the front of the sensor at any time without the need of opening the luminaire
- To have a maximum of flexibility these covers can be attached in every direction of 0°, 90°, 180° and 270°
Ordering data | |||
---|---|---|---|
유형 | 품목 번호 | 패키징, 카턴 | 개당 무게 |
ACU SHADING AISLE 16DPI highbay | 28001658 | 500 pc(s). | 0,002 |
ACU SHADING HALF 16DPI highbay | 28001660 | 500 pc(s). | 0,002 |
ACU SHADING ENTRY 16DPI highbay | 28001659 | 500 pc(s). | 0,003 |
Mounting box 16DPI Accessories
- Easy adaptation of suspended lighting fixtures to a sensor solution, just by adding one additional hole
- Side entry screw connection in combination with rubber gasket gives a true IP65 protection for industrial applications
- Easy remote commissioning with IR interface while sensor is still protected
- Tightening torque = 0.6 Nm
Ordering data | |||
---|---|---|---|
유형 | 품목 번호 | 패키징, 카턴 | 개당 무게 |
ACU MOUNTING BOX 16DPI HIGHBAY | 28001568 | 64 pc(s). | 0,105 |
CAD / RAY | ||
---|---|---|
유형 | 품목 번호 | CAD Files |
ACU MOUNTING BOX 16DPI HIGHBAY | 28001568 | CAD (1.2 MB) |
basicDIM ILD G2 CWM 20 PBI1 Accessories
- Approval marks:
-
-
-
-
-
- Push Button Interface (PBI) for ILD G2 system
- Flexible configuration via the ILD G2 in combination with the companionSUITE
- Short push button action: automatic / fade off (factory default)
- Long push button action: dim up / dim down (factory default)
- Double push button action: set new target value for light regulation (factory default)
- Through-wiring DA1 / DA2 possible
- Detachable mounting flaps, allow installation in flush-mounted boxes and luminaires
- A permanent short circuit between T1a and T1b results in limited function
- Only push buttons can be used
Ordering data | |||
---|---|---|---|
유형 | 품목 번호 | 패키징, 카턴 | 개당 무게 |
basicDIM ILD G2 CWM 20 PBI1 | 28003394 | 15 pc(s). | 0,012 |
CAD / RAY | ||
---|---|---|
유형 | 품목 번호 | CAD Files |
basicDIM ILD G2 CWM 20 PBI1 | 28003394 | CAD (1.0 MB) |
CAD / RAY | ||
---|---|---|
유형 | 품목 번호 | CAD Files |
basicDIM ILD G2 SFI 20 16DPI WH | 28003393 | CAD (3.2 MB) |