basicDIM ILD G2 5DPI

Kompaktes Steuermodul mit Umgebungslicht- und Bewegungssensor

For up to 64 DALI drivers, expandable with DALI-2 Input Devices (see data sheet 3.1 Wiring)
Integrated application controller
Flexible configuration via companionSUITE
2 DALI groups with adjustable offset
Monitoring of ambient light and motion detection
Infrared remote control for configuration and operation
Power supply via DALI line
Shutter for preventing occupancy detection in one direction included
Small dimensions allowing easy and inconspicuous integration in luminaries
보호 등급 I 및 보호 등급 II 조명 기구용
Wide range of accessories allowing extended application range
5년 보증
Casing: polycarbonate, black or white
보호 유형 IP20

Technical data
~를 통한 공급	DALI cable
Supply voltage (1)	11,5 – 20,5 V
Current consumption (no LED)	max. 11 mA
Current consumption (with LED)	max. 12 mA
장착 높이	5 m
Mounting hole diameter	14,1 mm
Detection angle for PIR detection	84°
Detection angle for light measurement	30°
Detection range for light measurement (2)	2 – 2.000 lx
Min. temperature difference between ambient temperature and detected object	± 4 °C
주위 온도 ta	-20 ... +50 °C
tc 포인트	60 °C
보관 온도 ts	-25 ... +60 °C
Housing material body	PC polycarbonate
Housing material lens	PE polyethylene
Housing colour body	White (similar to RAL 9010)
Housing colour lens	백색
Type of installation	조명 기구 설치
보호 유형	IP20

	Document	Size	Date
Download all selected files
	Data sheet	2.16 MB	07/03/2023	new

Type	Article number	인증서
Certificates / declarations of conformity

		인증서 ()

Document	Country	Size	Date of issue

				new

REMOTECONTROL IR6 Accessories

Ordering data
유형	품목 번호	치수 L x W x H	패키징, 카턴	개당 무게
REMOTECONTOL IR6	28000647	86,5 x 40,5 x 7,2 mm	500 pc(s).	0,019

Optional infra-red programming unit for basicDIM ILD G2
Setting of predefined parameter values
Programmable functions such as light level, time delay, P.I.R., bright-out, power up and grouping
IR range up to 20 m

Ordering data
유형	품목 번호	패키징, 카턴	개당 무게
basicDIM ILD G2 PROGRAMMER	28003484	150 pc(s).	0,04

Mounting frame for attaching all 5DP 14f sensor directly to the luminaire housing
Shutter for preventing occupancy detection in one direction
Glow wire test with 750 °C according to EN 61347-1

Mounting frame for wired 5DP 14f sensors allowing direct mounting to the ceiling
Easy „click in“ installation of the sensor
IP20
Casing: plastic, white
UV stabilized plastic
DALI MSensor 5DPI 14 is powered via DALI circuit, basicDIM DGC Sensor 5DPI 14f powered via control unit
Optional shutter for reduction of occupancy detection area allowing to decrease the occupancy detection area from 360° to 240°
Mounting kit with screws and decorative plugs
0.5 mm² wiring for the sensor
Two 3 x 1.5 mm² clamps with cable management (2 entry points on oppsite sides)
Glow wire test with 750 °C according to EN 61347-1

Ordering data
유형	품목 번호	패키징, 카턴	개당 무게
ACU Sensor Housing 14rs IP20	28001872	57 pc(s).	0,054

CAD / RAY
유형	품목 번호	CAD Files
ACU Sensor Housing 14rs IP20	28001872	CAD (384.2 KB)

Push Button Interface (PBI) for ILD G2 system
Flexible configuration via the ILD G2 in combination with the companionSUITE
Short push button action: automatic / fade off (factory default)
Long push button action: dim up / dim down (factory default)
Double push button action: set new target value for light regulation (factory default)
Through-wiring DA1 / DA2 possible
Detachable mounting flaps, allow installation in flush-mounted boxes and luminaires
A permanent short circuit between T1a and T1b results in limited function
Only push buttons can be used

Ordering data
유형	품목 번호	패키징, 카턴	개당 무게
basicDIM ILD G2 CWM 20 PBI1	28003394	15 pc(s).	0,012

CAD / RAY
유형	품목 번호	CAD Files
basicDIM ILD G2 CWM 20 PBI1	28003394	CAD (1.0 MB)