MSensor G3 PIR 16DPI WH
DALI-2 Multisensor
- Sensor developed to work with the latest DALI specification
- Monitoring of ambient light and occupancy detection
- Remote control interface allowing infrared remote control interaction
- Individual adjustment of the parameters
- Power supply via DALI line
- Mounting ring and gasket included to reach IP65 protection
- Wide range of accessories allowing extended application range
- Double terminals for through wiring
- 5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)
- 케이싱: 폴리카보네이트, 백색
- Type of protection up to IP65
- Tridonic MSensor G3 family sensors are developed according to DALI Standard EN 62386-101 Ed.2, also known as DALI-2. To be able to use the sensor in such installation, an application controller is necessary.
- List of approved application controller can be found on our WEB page in “Downloads” in document “Application_controllers_MSensor_G3.pdf”.
| Ordering data | ||||
|---|---|---|---|---|
| 유형 | 품목 번호 | 적합 용도 | 패키징, 카턴 | 개당 무게 |
| MSensor G3 SFI 30 PIR 16DPI WH | 28002234 | 조명 기구 설치 | 10 pc(s). | 0,105 |
| Technical data | |
|---|---|
| ~를 통한 공급 | DALI cable |
| Supply voltage (1) | 9,5 – 22,5 V |
| Current consumption (no LED) | ≤ 8 mA |
| Current consumption (with LED) | ≤ 9 mA |
| Supported operating modes | 0 or 128 (default) |
| Mounting height (2) | 8 – 18 m |
| Adjustment range position “low” | 8 – 12 m |
| Adjustment range position “high” (2) | 12 – 18 m |
| Mounting opening | 70 x 83 mm |
| Hosuing thickness of the luminaire | 0,75 – 4 mm |
| Detection angle for PIR detection angle “low” | 72° |
| Detection angle for PIR detection angle “high” | 60° |
| Detection angle for light measurement | 13° |
| Detection range for light measurement (3) | 0,5 – 2.000 lx |
| Min. temperature difference between ambient temperature and detected object | ± 4 °C |
| 주위 온도 ta | -20 ... +50 °C |
| tc 포인트 | 60 °C |
| 보관 온도 ts | -25 ... +60 °C |
| 치수 L x W x H | 99,3 x 86,3 x 46,5 mm |
| Housing material body | PC polycarbonate |
| Housing material lens | PE polyethylene |
| Housing colour body | White (similar to RAL 9016) |
| Housing colour lens | 백색 |
| Type of installation | 조명 기구 설치 |
| 보호 유형 (4) | Up to IP65 |
- (1) Uin acc. IEC 62386-101.
- (2) For mounting height higher than 16 m it is recommended to use several sensors grouped together in one occupancy group. As the sensitivity for the detection diameter can not be guaranteed for high over 16 m.
- (3) The measured value at the sensor head corresponds to approx. 3 to 6,300 lux on the surface measured.
- (4) Depending on the installation type up to IP 65 for more details see data sheet chapter 3.1.
| Certificates / declarations of conformity | ||
| Type | Article number | 인증서 |
|---|---|---|
| 인증서 () | ||
REMOTECONTROL IR6 Accessories
- 옵션 적외선 리모컨
- 켜기 및 끄기(On/Off 버튼)
- 조광(강하게/약하게 버튼)
- 자동 조광 활성화(자동 버튼)
- 임계값 제어점 설정(설정 버튼)
- IR range up to 20 m
| Ordering data | ||||
|---|---|---|---|---|
| 유형 | 품목 번호 | 치수 L x W x H | 패키징, 카턴 | 개당 무게 |
| REMOTECONTOL IR6 | 28000647 | 86,5 x 40,5 x 7,2 mm | 500 pc(s). | 0,019 |
Shading Set Accessories
- Shading set consisting of 3 different types of lenses
- Three different covers for the MSensor G3 SFI 30 PIR 16DPI WH, basicDIM ILD G2 and basicDIM ILD give the ability to reduce the detection area in aisle applications
- These covers can be attached or removed from/to the front of the sensor at any time without the need of opening the luminaire
- To have a maximum of flexibility these covers can be attached in every direction of 0°, 90°, 180° and 270°
| Ordering data | |||
|---|---|---|---|
| 유형 | 품목 번호 | 패키징, 카턴 | 개당 무게 |
| ACU SHADING AISLE 16DPI highbay | 28001658 | 500 pc(s). | 0,002 |
| ACU SHADING HALF 16DPI highbay | 28001660 | 500 pc(s). | 0,002 |
| ACU SHADING ENTRY 16DPI highbay | 28001659 | 500 pc(s). | 0,003 |
Mounting box 16DPI Accessories
- Easy adaptation of suspended lighting fixtures to a sensor solution, just by adding one additional hole
- Side entry screw connection in combination with rubber gasket gives a true IP65 protection for industrial applications
- Easy remote commissioning with IR interface while sensor is still protected
- Tightening torque = 0.6 Nm
| Ordering data | |||
|---|---|---|---|
| 유형 | 품목 번호 | 패키징, 카턴 | 개당 무게 |
| ACU MOUNTING BOX 16DPI HIGHBAY | 28001568 | 64 pc(s). | 0,105 |
| CAD / RAY | ||
|---|---|---|
| 유형 | 품목 번호 | CAD Files |
| ACU MOUNTING BOX 16DPI HIGHBAY | 28001568 | CAD (1.2 MB) |
Sensor housing ACU 033 IP65 WH Accessories
- IP65 protection box
- Mounting box for MSensor G3 SFI 30 PIR 16DPI WH sensors allowing direct mounting to the ceiling
- Easy “Click In” installation of the sensor to the top part of the box
- Casing: ABS, white
- UV stabilized plastic
- Full mounting kit with screws and dowels, allowing hassle free mount of the box to the ceiling
- Including 2 cable glads and 2 grommets for ideal IP protection of inserted cables
- Casing passed glow wire test with 850 °C according to EN 61347-1
| Ordering data | |||
|---|---|---|---|
| 유형 | 품목 번호 | 패키징, 카턴 | 개당 무게 |
| Sensor housing ACU 033 IP65 WH | 28003866 | 48 pc(s). | 0,298 |
| CAD / RAY | ||
|---|---|---|
| 유형 | 품목 번호 | CAD Files |
| MSensor G3 SFI 30 PIR 16DPI WH | 28002234 | CAD (3.2 MB) |