EM powerLED SELFTEST FX LiFePO4 1 – 2 W
Kombinierte Notlicht-LED-Driver 1 – 4 W
- Emergency lighting LED driver with selftest function
- For self-contained emergency lighting
- SELV for output voltage < 60 V DC
- Low profile casing (21 x 30 mm cross-section)
- EM = Emergency
- 5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)
- Mains and emergency operation
- Self-test as per IEC 62034
- Constant current mode
- With either screw or clip fastening (clip-fix)
- 1, 2 or 3 h rated duration
- Selectable operating time (jumper)
- Two-colour status display LED
- “Rest mode” function
- SELV classified (outputs powerLED, battery, status LED, test switch)
- Very low energy consumption from the battery after activation of the deep discharge protection
- Intelligent charge system
- Deep discharge protection
- Temperature protection
- Reverse polarity protection
- LiFePO4 batteries with Tridonic LiFeGuard
- Overcharge-/Overdischarge protection
- Ensures safety in use
- LiFePO4: 4 – 8 years design life
- 5 years guarantee for LiFePO4 batteries (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)
Data sheet
| 정격 공급 전압 |
220 – 240 V |
| AC 전압 범위 |
198 – 264 V |
| 주 전원 주파수 |
50 / 60 Hz |
| THD(230V, 50Hz, 전 부하에서) |
< 120 % |
| U-OUT (including open- / short-circuit and double load) |
15 V |
| Max. open circuit voltage |
15 V |
| 출력 전류 공차 |
± 10 % |
| 전 부하에서 표준 출력 LF 전류 리플 |
± 5 % |
| Starting time |
< 0,7 s |
| Output current |
Refer to data sheet |
| 과전압 보호 |
320 V (for 48 h) |
| 최대 케이싱 온도 tc |
75 °C |
| 주위 온도 ta |
-25 ... +55 °C |
| Mains voltage changeover threshold |
According to EN 60598-2-22 |
| 주 전원 서지 기능(L - N 사이) |
1 kV |
| 출력 측에서 서지 전압(PE에 대해) |
< 2 kV |
| 주 전원 서지 기능(L/N - PE 사이) |
2 kV |
| 보호 유형 |
IP20 |
| 수명 |
최대 100.000 h |
| 유형 |
Rated duration |
Number of LEDs |
Typ. λ (at 230 V, 50 Hz) |
Forward voltage range LED module
(1)
(2) |
Non-maintained operation |
Maintained operation |
| Mains current in charging operation
(3) |
Mains power in charging operation
(3) |
Mains current in charging operation
(3) |
Mains power in charging operation
(3) |
|
EM pLED ST FX 201 LiFePO4 1W SCREW
|
1 h |
1 |
0,55C |
2,6 – 3,4 V |
16 / 11 mA |
1,5 / 0,9 W |
27 / 23 mA |
3,5 / 2,8 W |
|
EM pLED ST FX 201 LiFePO4 1W SCREW
|
2 h |
1 |
0,55C |
2,6 – 3,4 V |
16 / 11 mA |
1,5 / 0,9 W |
27 / 23 mA |
3,5 / 2,8 W |
|
EM pLED ST FX 201 LiFePO4 1W SCREW
|
3 h |
1 |
0,55C |
2,6 – 3,4 V |
21 / 11 mA |
2,1 / 0,9 W |
31 / 23 mA |
4,0 / 2,8 W |
|
EM pLED ST FX 202 LiFePO4 2W CLIP
|
1 h |
1 |
0,58C |
2,6 – 3,4 V |
16 / 11 mA |
1,5 / 0,9 W |
27 / 23 mA |
3,5 / 2,8 W |
|
EM pLED ST FX 202 LiFePO4 2W CLIP
|
1 h |
2 |
0,58C |
5,2 – 6,8 V |
16 / 11 mA |
1,5 / 0,9 W |
37 / 33 mA |
5,0 / 4,1 W |
|
EM pLED ST FX 202 LiFePO4 2W CLIP
|
2 h |
1 |
0,58C |
2,6 – 3,4 V |
20 / 11 mA |
2,2 / 0,9 W |
31 / 23 mA |
4,0 / 2,8 W |
|
EM pLED ST FX 202 LiFePO4 2W CLIP
|
2 h |
2 |
0,58C |
5,2 – 6,8 V |
20 / 11 mA |
2,2 / 0,9 W |
42 / 33 mA |
5,5 / 4,1 W |
|
EM pLED ST FX 202 LiFePO4 2W CLIP
|
3 h |
1 |
0,58C |
2,6 – 3,4 V |
22 / 11 mA |
2,5 / 0,9 W |
33 / 23 mA |
4,5 / 2,8 W |
|
EM pLED ST FX 202 LiFePO4 2W CLIP
|
3 h |
2 |
0,58C |
5,2 – 6,8 V |
22 / 11 mA |
2,5 / 0,9 W |
44 / 33 mA |
5,8 / 4,1 W |
|
EM pLED ST FX 202 LiFePO4 2W SCREW
|
1 h |
1 |
0,58C |
2,6 – 3,4 V |
16 / 11 mA |
1,5 / 0,9 W |
27 / 23 mA |
3,5 / 2,8 W |
|
EM pLED ST FX 202 LiFePO4 2W SCREW
|
1 h |
2 |
0,58C |
5,2 – 6,8 V |
16 / 11 mA |
1,5 / 0,9 W |
37 / 33 mA |
5,0 / 4,1 W |
|
EM pLED ST FX 202 LiFePO4 2W SCREW
|
2 h |
1 |
0,58C |
2,6 – 3,4 V |
20 / 11 mA |
2,2 / 0,9 W |
31 / 23 mA |
4,0 / 2,8 W |
|
EM pLED ST FX 202 LiFePO4 2W SCREW
|
2 h |
2 |
0,58C |
5,2 – 6,8 V |
20 / 11 mA |
2,2 / 0,9 W |
42 / 33 mA |
5,5 / 4,1 W |
|
EM pLED ST FX 202 LiFePO4 2W SCREW
|
3 h |
1 |
0,58C |
2,6 – 3,4 V |
22 / 11 mA |
2,5 / 0,9 W |
33 / 23 mA |
4,5 / 2,8 W |
|
EM pLED ST FX 202 LiFePO4 2W SCREW
|
3 h |
2 |
0,58C |
5,2 – 6,8 V |
22 / 11 mA |
2,5 / 0,9 W |
44 / 33 mA |
5,8 / 4,1 W |
|
EM pLED ST FX 201 LiFePO4 1W CLIP
|
1 h |
1 |
0,55C |
2,6 – 3,4 V |
16 / 11 mA |
1,5 / 0,9 W |
27 / 23 mA |
3,5 / 2,8 W |
|
EM pLED ST FX 201 LiFePO4 1W CLIP
|
2 h |
1 |
0,55C |
2,6 – 3,4 V |
16 / 11 mA |
1,5 / 0,9 W |
27 / 23 mA |
3,5 / 2,8 W |
|
EM pLED ST FX 201 LiFePO4 1W CLIP
|
3 h |
1 |
0,55C |
2,6 – 3,4 V |
21 / 11 mA |
2,1 / 0,9 W |
31 / 23 mA |
4,0 / 2,8 W |
Prüftaster EM2
Accessories
- Approval marks:
-
![RoHs]( "RoHs")
- For connection to the emergency lighting unit
- For checking the device function
- Dielectric strength: 1,500 V AC for 60 seconds
| 유형 |
품목 번호 |
패키징, 백 |
패키징, 카턴 |
개당 무게 |
|
Test switch EM 2
|
89805277
|
25 pc(s). |
600 pc(s). |
0,009 |
| 유형 |
품목 번호 |
CAD Files |
|
Test switch EM 2
|
89805277
|
CAD
(1009.0 KB)
|
Statusanzeige zweifarbige LED EM
Accessories
- Approval marks:
-
![RoHs]( "RoHs")
- Two-colour status display LED
- Green: system OK, red: fault
| 유형 |
품목 번호 |
패키징, 백 |
패키징, 카턴 |
개당 무게 |
|
LED EM
|
89899720
|
25 pc(s). |
200 pc(s). |
0,017 |
|
LED EM
|
89899753
|
25 pc(s). |
200 pc(s). |
0,013 |
| 유형 |
품목 번호 |
CAD Files |
|
LED EM
|
89899720
|
CAD
(579.9 KB)
|
|
LED EM
|
89899753
|
CAD
(579.9 KB)
|
Accessories
- Extension cable for LiFePO4 batteries
- Cable length 500 mm
- 3-pole plug connection
| 유형 |
품목 번호 |
패키징, 백 |
패키징, 카턴 |
개당 무게 |
|
EXTENSION CABLE LiFePO4 500mm
|
28002461
|
10 pc(s). |
200 pc(s). |
0,01 |
EMpLED Strain-relief set 200x43x25,5mm
Accessories
- Approval marks:
-
![Independent gear]( "Independent gear")
-
![SC2 - Protection Class 2]( "SC2 - Protection Class 2")
- Optional strain-relief set for independent applications
- LED 드라이버가 완전한 등급 II 호환 LED
드라이버로 변신(예: 천장 설치)
- Easy and tool-free mounting to the LED driver, screwless cable-clamp channels with strain-relief (200 x 43 x 25.5 mm)
| 유형 |
품목 번호 |
패키징, 카턴 |
개당 무게 |
|
EM pLED SR
|
28004033
|
10 pc(s). |
0,05 |
| 유형 |
품목 번호 |
CAT_EPD |
|
EM pLED ST FX 201 LiFePO4 1W SCREW
|
89800798
|
EPD
|
|
EM pLED ST FX 202 LiFePO4 2W SCREW
|
89800800
|
EPD
|
|
EM pLED ST FX 201 LiFePO4 1W CLIP
|
89800797
|
EPD
|
|
EM pLED ST FX 202 LiFePO4 2W CLIP
|
89800799
|
EPD
|
