Modul LLE 24mm 1100lm Activating Light HV EXC1
- 선형 및 패널 조명용으로 이상적
 - 2 terminals for serial wiring
 - Perfectly uniform light, even if several LED modules are used together in a line
 - 빠르고 간단한 LED 모듈 간 배선을 위한 푸시 단자
 - Broad portfolio from extruded lenses and covers available
 - HE ... High Efficiency, NM ... Nominal Mode, HO ... High Output
 - Long lifetime: 60,000 hours
 - 5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)
 - Colour temperature 4,200 K
 - Useful luminous flux 1,080 lm (24 x 280 mm) and 2,160 lm (24 x 560 mm) at Irated and tp = 25 °C
 - Efficacy of the LED module 150 lm/W at Irated and tp = 25 °C
 - Melanopic ratio MEER 0.91
 - 높은 색 일관성(MacAdam 3) (1)
 - Small luminous flux tolerances
 - Module dimension 24 x 280 mm and 24 x 560 mm (ZHAGA compliant)
 - Simple installation via clips or screws
 - Combine Tridonic's LED modules and dimmable drivers to achieve an outstanding system efficacy (configuration possible via https://setbuilder.tridonic.com/)
 
| Ordering data | ||||
|---|---|---|---|---|
| 유형 | 품목 번호 | 색온도 | 패키징, 카턴 | 개당 무게 | 
| LLE 24x280mm 1100lm 842 AL HV EXC1 | 28004202 | 4.200 K | 108 pc(s). | 0,023 | 
| LLE 24x560mm 2200lm 842 AL HV EXC1 | 28004203 | 4.200 K | 108 pc(s). | 0,046 | 
| Technical data | |
|---|---|
| 빔 특성 | 120° | 
| 주위 온도 ta | -40 ... +65 °C | 
| tp 정격 | 50 °C | 
| tc | 85 °C | 
| Irated | 325 mA | 
| Imax | 540 mA | 
| 최대 허용 LF 전류 리플 | 1.060 mA | 
| 최대 허용 피크 전류 | 1.800 mA / max. 10 ms | 
| 절연을 위한 최대 작업 전압 (1) | 440 V | 
| 절연 테스트 전압 | 1,88 kV | 
| 인쇄회로기판의 CTI | ≥ 600 | 
| ESD 분류 | Severity level 2 | 
| 위험 그룹(IEC 62471) | RG0 | 
| IEC 62031에 따른 분류 | 빌트인 | 
| 보호 유형 | IP00 | 
| Lumen maintenance L70B50 | 60.000 h | 
| Specific technical data | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 유형 | 품목 번호 | 측광 코드 | Useful luminous flux at tp = 25 °C (1) | Expected luminous flux at tp rated (2) | 표준 순방향 전류 | Min. forward voltage at tp rated | tp = 25°C에서 최대 순방향 전압 | Power consumption Pon at tp = 25 °C (3) | tp = 25°C에서 광효율 모듈 | Expected efficacy of the module at tp rated | 연색지수 CRI | 
| LLE 24x280mm 1100lm 842 AL HV EXC1 | 28004202 | 842/359 | – | 641 lm | 200 mA | 20,5 V | 22,0 V | – | – | 149 lm/W | > >80 | 
| LLE 24x280mm 1100lm 842 AL HV EXC1 | 28004202 | 842/359 | 1.080 lm | 1.047 lm | 325 mA | 21,1 V | 22,6 V | 7,2 W | 150 lm/W | 147 lm/W | > >80 | 
| LLE 24x280mm 1100lm 842 AL HV EXC1 | 28004202 | 842/359 | – | 1.519 lm | 500 mA | 21,8 V | 23,3 V | – | – | 134 lm/W | > >80 | 
| LLE 24x560mm 2200lm 842 AL HV EXC1 | 28004203 | 842/359 | – | 1.282 lm | 200 mA | 41,1 V | 43,9 V | – | – | 149 lm/W | > >80 | 
| LLE 24x560mm 2200lm 842 AL HV EXC1 | 28004203 | 842/359 | 2.160 lm | 2.095 lm | 325 mA | 42,2 V | 45,1 V | 14,4 W | 150 lm/W | 147 lm/W | > >80 | 
| LLE 24x560mm 2200lm 842 AL HV EXC1 | 28004203 | 842/359 | – | 3.038 lm | 500 mA | 43,6 V | 46,5 V | – | – | 134 lm/W | > >80 | 
| Certificates / declarations of conformity | ||
| Type | Article number | 인증서 | 
|---|---|---|
| 인증서 () | ||
LINEAR COVER LLE Accessories
- LINEAR COVER for LLE
 - Protection against direct touch for non-SELV applications (recommendation LLE 20: use all fixing points and screwed Endcap, recommendation LLE 24: use all fixing points)
 - Fast snap on mounting on to LLE 20: with M4 screws and plastic washers, to LLE 24: with clips or plastic washers
 - High transmission: transparent, semi-transparent and diffuse
 - Material: PMMA
 - Tolerances: ± 1 mm for 597 mm length (ends finished), + 10 mm from length 1,150 mm (ends raw)
 
| Ordering data | ||||||
|---|---|---|---|---|---|---|
| 유형 | 품목 번호 | 색 | 길이 L | 효율 | 패키징, 카턴 | 개당 무게 | 
| LINEAR COVER SY Transparent 1600mm | 28000338 | 투명 | 1.600 mm | 94 % | 12 pc(s). | 0,272 | 
| LINEAR COVER SY Frosted 1800mm | 28000437 | 반투명 | 1.800 mm | 87 % | 12 pc(s). | 0,308 | 
| LINEAR COVER SY Frosted 1600mm | 28000339 | 반투명 | 1.600 mm | 87 % | 12 pc(s). | 0,272 | 
| LINEAR COVER SY Frosted 1500mm | 28000435 | 반투명 | 1.500 mm | 87 % | 12 pc(s). | 0,244 | 
| LINEAR COVER SY Frosted 1200mm | 28000422 | 반투명 | 1.200 mm | 87 % | 12 pc(s). | 0,205 | 
| LINEAR COVER SY Frosted 597mm | 28000340 | 반투명 | 597 mm | 87 % | 12 pc(s). | 0,102 | 
| LINEAR COVER SY Diffuse 1800mm | 28000438 | 확산 | 1.800 mm | 76 % | 12 pc(s). | 0,308 | 
| LINEAR COVER SY Diffuse 1600mm | 28000341 | 확산 | 1.600 mm | 76 % | 12 pc(s). | 0,272 | 
| LINEAR COVER SY Diffuse 1500mm | 28000436 | 확산 | 1.500 mm | 76 % | 12 pc(s). | 0,257 | 
| LINEAR COVER SY Diffuse 1200mm | 28000434 | 확산 | 1.200 mm | 76 % | 12 pc(s). | 0,205 | 
| LINEAR COVER SY Diffuse 597mm | 28000342 | 확산 | 597 mm | 76 % | 12 pc(s). | 0,102 | 
| CAD / RAY | ||
|---|---|---|
| 유형 | 품목 번호 | CAD Files | 
| LINEAR COVER SY Transparent 1600mm | 28000338 | CAD (208.6 KB) | 
| LINEAR COVER SY Frosted 1800mm | 28000437 | CAD (208.6 KB) | 
| LINEAR COVER SY Frosted 1600mm | 28000339 | CAD (208.6 KB) | 
| LINEAR COVER SY Frosted 1500mm | 28000435 | CAD (208.6 KB) | 
| LINEAR COVER SY Frosted 1200mm | 28000422 | CAD (208.6 KB) | 
| LINEAR COVER SY Frosted 597mm | 28000340 | CAD (208.6 KB) | 
| LINEAR COVER SY Diffuse 1800mm | 28000438 | CAD (208.6 KB) | 
| LINEAR COVER SY Diffuse 1600mm | 28000341 | CAD (208.6 KB) | 
| LINEAR COVER SY Diffuse 1500mm | 28000436 | CAD (208.6 KB) | 
| LINEAR COVER SY Diffuse 1200mm | 28000434 | CAD (208.6 KB) | 
| LINEAR COVER SY Diffuse 597mm | 28000342 | CAD (208.6 KB) | 
ACL ENDCAP LLE Accessories
- ENDCAP for LLE
 - PUSH-FIX: Fast snap on mounting (sheet thickness 0.5 – 1.0 mm), for drilling hole 4 mm
 - SCREW-FIX: Screw mounting with EJOT Delta PT WN 5451 30x8 (not included), tightening torque 0.7 Nm
 - Clip made of polycarbonate
 
| Ordering data | ||||
|---|---|---|---|---|
| 유형 | 품목 번호 | 색 | 패키징, 카턴 | 개당 무게 | 
| ACL ENDCAP LLE24 PUSH-FIX | 28001037 | 백색 | 480 pc(s). | 0,003 | 
| ACL ENDCAP LLE24 SCREW-FIX | 28002315 | 백색 | 480 pc(s). | 0,003 | 
| CAD / RAY | ||
|---|---|---|
| 유형 | 품목 번호 | CAD Files | 
| ACL ENDCAP LLE24 PUSH-FIX | 28001037 | CAD (586.9 KB) | 
| ACL ENDCAP LLE24 SCREW-FIX | 28002315 | CAD (880.3 KB) | 
ACL LINEAR LENS 24mm Accessories
- Linear lens for LLE 20 / 24
 - Available with different beam characteristics
 - Protection against direct touch for non-SELV applications (recommendation: use all fixing points)
 - Fast snap on mounting on to LLE 20: with M4 screws and plastic washers, to LLE 24: with clips or plastic washers
 - Recommendation: Fastening with screws and plastic washers, see 2.3 Heat sink specifications in data sheet
 - Material: PMMA
 - Available lengths: 1,200, 1,500 and 1,800 mm, Tolerance: + 10 mm (ends raw)
 - Max. permissible temperature 80 °C
 - Photometric data available on website
 - ENDCAP for LINEAR LENS 24mm INTENSE, ASY and DASY
 - Mounting by clipping in and screwing from below using screw EJOT Delta PT WN 5451 20x4, tightening torque 0.7 Nm
 - Made of Polyamide UL94 V0
 
| Ordering data | ||||||
|---|---|---|---|---|---|---|
| 유형 | 품목 번호 | 길이 L | 빔 특성 | 효율 | 패키징, 카턴 | 개당 무게 | 
| ACL LINEAR LENS 24x1200mm 60° | 28001428 | 1.200 mm | 60° | 97 % | 21 pc(s). | 0,196 | 
| ACL LINEAR LENS 24x1200mm 90° | 28001429 | 1.200 mm | 90° | 97 % | 21 pc(s). | 0,165 | 
| ACL LINEAR LENS 24x1500mm 60° | 28000953 | 1.500 mm | 60° | 97 % | 21 pc(s). | 0,261 | 
| ACL LINEAR LENS 24x1500mm 90° | 28000955 | 1.500 mm | 90° | 97 % | 21 pc(s). | 0,221 | 
| ACL LINEAR LENS 24x1200mm INTENSE | 28002024 | 1.200 mm | 40° | 95 % | 18 pc(s). | 0,261 | 
| ACL LINEAR LENS 24x1500mm INTENSE | 28002025 | 1.500 mm | 40° | 95 % | 18 pc(s). | 0,326 | 
| ACL LINEAR LENS 24x1800mm INTENSE | 28002026 | 1.800 mm | 40° | 95 % | 18 pc(s). | 0,392 | 
| ACL LINEAR LENS 24x1200mm BATWING | 28002027 | 1.200 mm | 배트윙 | 95 % | 18 pc(s). | 0,275 | 
| ACL LINEAR LENS 24x1500mm BATWING | 28002028 | 1.500 mm | 배트윙 | 95 % | 18 pc(s). | 0,344 | 
| ACL LINEAR LENS 24x1800mm BATWING | 28002029 | 1.800 mm | 배트윙 | 95 % | 18 pc(s). | 0,412 | 
| ACL LINEAR LENS 24x1200mm ASY | 28002030 | 1.200 mm | 비대칭 | 95 % | 18 pc(s). | 0,250 | 
| ACL LINEAR LENS 24x1500mm ASY | 28002031 | 1.500 mm | 비대칭 | 95 % | 18 pc(s). | 0,312 | 
| ACL LINEAR LENS 24x1800mm ASY | 28002032 | 1.800 mm | 비대칭 | 95 % | 18 pc(s). | 0,375 | 
| ACL LINEAR LENS 24x1200mm DASY | 28002033 | 1.200 mm | 이중 비대칭 | 92 % | 18 pc(s). | 0,249 | 
| ACL LINEAR LENS 24x1500mm DASY | 28002034 | 1.500 mm | 이중 비대칭 | 92 % | 18 pc(s). | 0,311 | 
| ACL LINEAR LENS 24x1800mm DASY | 28002035 | 1.800 mm | 이중 비대칭 | 92 % | 18 pc(s). | 0,373 | 
| ACL Endcap LENS 24mm PSF | 28002669 | – | – | – | 3.600 pc(s). | 0,003 | 
| CAD / RAY | |||
|---|---|---|---|
| 유형 | 품목 번호 | CAD Files | Photometric files | 
| ACL LINEAR LENS 24x1200mm 60° | 28001428 | CAD (195.6 KB) | |
| ACL LINEAR LENS 24x1200mm 90° | 28001429 | CAD (197.6 KB) | |
| ACL LINEAR LENS 24x1500mm 60° | 28000953 | CAD (195.6 KB) | |
| ACL LINEAR LENS 24x1500mm 90° | 28000955 | CAD (197.6 KB) | |
| ACL LINEAR LENS 24x1200mm INTENSE | 28002024 | CAD (190.6 KB) | Photometric (146.6 KB) | 
| ACL LINEAR LENS 24x1500mm INTENSE | 28002025 | CAD (190.6 KB) | Photometric (146.6 KB) | 
| ACL LINEAR LENS 24x1800mm INTENSE | 28002026 | CAD (190.6 KB) | Photometric (146.6 KB) | 
| ACL LINEAR LENS 24x1200mm BATWING | 28002027 | CAD (198.6 KB) | Photometric (144.3 KB) | 
| ACL LINEAR LENS 24x1500mm BATWING | 28002028 | CAD (198.6 KB) | Photometric (144.3 KB) | 
| ACL LINEAR LENS 24x1800mm BATWING | 28002029 | CAD (198.6 KB) | Photometric (144.3 KB) | 
| ACL LINEAR LENS 24x1200mm ASY | 28002030 | CAD (190.6 KB) | Photometric (146.6 KB) | 
| ACL LINEAR LENS 24x1500mm ASY | 28002031 | CAD (190.6 KB) | Photometric (146.6 KB) | 
| ACL LINEAR LENS 24x1800mm ASY | 28002032 | CAD (190.6 KB) | Photometric (146.6 KB) | 
| ACL LINEAR LENS 24x1200mm DASY | 28002033 | CAD (192.6 KB) | Photometric (138.6 KB) | 
| ACL LINEAR LENS 24x1500mm DASY | 28002034 | CAD (192.6 KB) | Photometric (138.6 KB) | 
| ACL LINEAR LENS 24x1800mm DASY | 28002035 | CAD (192.6 KB) | Photometric (138.6 KB) | 
| ACL Endcap LENS 24mm PSF | 28002669 | CAD (300.4 KB) | |
ACL CLIP 4.3mm Accessories
- Clip for fixation of LED modules with 4.3 mm holes
 - Fast snap on mounting (sheet thickness 0.5 – 1.0 mm for PUSH-FIX and 1 – 2 mm for PUSH-FIX Long)
 - For drilling hole 4 mm
 - Clip made of polycarbonate
 - Minimum sales quantity 500 pcs.
 
| Ordering data | ||||
|---|---|---|---|---|
| 유형 | 품목 번호 | 색 | 패키징, 백 (1) | 개당 무게 | 
| ACL CLIP 4.3mm PUSH-FIX | 28001036 | 백색 | 500 pc(s). | 0,001 | 
| ACL CLIP 4,3mm PUSH-FIX Long | 28002314 | 투명 | 500 pc(s). | 0,001 | 
| CAD / RAY | ||
|---|---|---|
| 유형 | 품목 번호 | CAD Files | 
| ACL CLIP 4.3mm PUSH-FIX | 28001036 | CAD (360.3 KB) | 
| ACL CLIP 4,3mm PUSH-FIX Long | 28002314 | CAD (320.4 KB) | 
ACL BRIDGE LLE24/40 Accessories
- Enables the fixation of 24 mm wide Tridonic LED modules to fixtures made for 40 mm wide modules
 - Ideal for extruded aluminium gear trays made for 40 mm modules with pre-alignment knobs
 - Clip-on for LINEAR COVER and LINEAR LENS
 - For LLE 24 with 280 mm module minimum 2 bridges required
 - For LLE 24 with 560 mm module minimum 3 bridges required
 - Fixation via M3 or M4 countersunk screw, max. tightening torque 0.5 Nm
 - BRIDGE made of white polycarbonate
 - Minimum sales quantity 600 pcs.
 
| Ordering data | ||||
|---|---|---|---|---|
| 유형 | 품목 번호 | 색 | 패키징, 카턴 | 개당 무게 | 
| ACL BRIDGE LLE24/40 SCREW-FIX | 28001205 | 백색 | 600 pc(s). | 0,001 | 
| CAD / RAY | ||
|---|---|---|
| 유형 | 품목 번호 | CAD Files | 
| ACL BRIDGE LLE24/40 SCREW-FIX | 28001205 | CAD (549.9 KB) | 

