MSensor G3 PIR 4DPI WDA WH
DALI-2 Multisensor
- Sensor developed to work with the latest DALI specification
- Wide detection angle of up to 125° covering an area of up to 141 m²
- Monitoring of ambient light and occupancy detection
- Remote control interface allowing infrared remote control interaction
- Individual adjustment of the parameters with configuration software
- Power supply via DALI line
- Wide range of accessories allowing extended application range
- Small dimensions allowing easy and inconspicuous integration in luminaries
- 5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)
- 케이싱: 폴리카보네이트, 백색
- Type of protection up to IP54
- Tridonic MSensor G3 family sensors are developed according to DALI Standard EN 62386-101 Ed.2, also known as DALI-2. To be able to use the sensor in such installation, an application controller is necessary.
- List of approved application controller can be found on our WEB page in “Downloads” in document “Application_controllers_MSensor_G3.pdf”.
| Ordering data | ||||
|---|---|---|---|---|
| 유형 | 품목 번호 | 치수 L x W x H | 패키징, 카턴 | 개당 무게 |
| MSensor G3 SFI 30 PIR 4DPI WDA WH | 28003808 | 30,0 x 30,0 x 29,3 mm | 10 pc(s). | 0,013 |
| MSensor G3 SSM 30 4DPI WDA WH | 28004637 | 96,3 x 96,3 x 36,6 mm | 30 pc(s). | 0,060 |
| MSensor G3 SRC 30 4DPI WDA WH | 28004638 | 52,3 x 54,7 x 51,5 mm | 10 pc(s). | 0,058 |
| Technical data | |
|---|---|
| ~를 통한 공급 | DALI cable |
| Supply voltage (1) | 9,5 – 22,5 V |
| Current consumption (no LED) | max. 8 mA |
| Current consumption (with LED) | max. 9 mA |
| 시작 시간 (2) | ≤ 30 s |
| Supported operating modes | 0 or 128 (default) |
| Mounting height | 2 – 4 m |
| Mounting hole diameter | 23 mm |
| Hosuing thickness of the luminaire | 0,75 – 4 mm |
| Detection angle for PIR detection (3) | 125° |
| Detection angle for light measurement (4) | 80° – 150° |
| Detection range for light measurement (5) | 0,5 – 2.000 lx |
| Min. temperature difference between ambient temperature and detected object | ± 4 °C |
| 주위 온도 ta | -20 ... +50 °C |
| tc 포인트 | 60 °C |
| 보관 온도 ts | -25 ... +60 °C |
| Housing material body | PC polycarbonate |
| Housing material lens | PE polyethylene |
| Housing colour body | White (similar to RAL 9010) |
| Housing colour lens | 백색 |
| Type of installation | 조명 기구 설치 |
| 보호 유형 (6) | Up to IP54 |
- (1) Uin acc. IEC 62386-101.
- (2) Starting time is the time until the PIR element of the sensor is ready and delivers correct values.
- (3) For details see chapter detection area in data sheet.
- (4) For details see chapter light measurement in data sheet.
- (5) The measured value at the sensor head corresponds to approx. 3 to 6,300 lux on the surface measured.
- (6) Depending on the installation type up to IP54 for more details see chapter 3.7.
- MSensor G3 SSM 30 PIR 4DPI WDA WH
-
| Certificates / declarations of conformity | ||
| Type | Article number | 인증서 |
|---|---|---|
| 인증서 () | ||
Sensor mounting kit ACU 033 IP66 WH Accessories
- Easy to mount circlip lockring, compatible with industry standard circlip pliers (size 19 – 60 mm)
- Corrosion resistant circlip made from stainless steel
- Appealing plastic cover ring, allowing to mount the sensor in luminaires in an easy and visual attractive way
- Fulfills the impact energy requirements of freestanding luminaires of 0.5 J
- Includes 2 gaskets offering flexible installation in luminaries
- Plastic cover passed glow wire test with 750 °C in according to EN 61347-1
- In combination with the MSensor G3 SFI 30 PIR 4DPI WDA WH, a maximum of IP54 is possible
- In combination with the basicDIM ILD G2 4DPI WDA, a maximum of IP54 is possible
| Ordering data | |||
|---|---|---|---|
| 유형 | 품목 번호 | 패키징, 카턴 | 개당 무게 |
| Sensor mounting kit ACU 033 IP66 WH | 28004207 | 20 pc(s). | 0,006 |
Sensor mounting kit ACU 030 IP66 WH Accessories
- Mounting ring allowing to mount the sensor into a luminaire in easy and visual attractive way
- Including three different gaskets 3, 5 and 8 mm
- For more details see data sheet chapter 3.5 (mounting ring) and 3.6 (gasket)
- Mounting ring passed glow wire test with 750 °C according to EN 61347-1
- In combination with the MSensor G3 SFI 30 PIR 4DPI WDA WH, a maximum of IP54 is possible
| Ordering data | |||
|---|---|---|---|
| 유형 | 품목 번호 | 패키징, 카턴 | 개당 무게 |
| Sensor mounting kit ACU 030 IP66 WH | 28002459 | 20 pc(s). | 0,006 |
REMOTECONTROL IR6 Accessories
- 옵션 적외선 리모컨
- 켜기 및 끄기(On/Off 버튼)
- 조광(강하게/약하게 버튼)
- 자동 조광 활성화(자동 버튼)
- 임계값 제어점 설정(설정 버튼)
- IR range up to 20 m
| Ordering data | ||||
|---|---|---|---|---|
| 유형 | 품목 번호 | 치수 L x W x H | 패키징, 카턴 | 개당 무게 |
| REMOTECONTOL IR6 | 28000647 | 86,5 x 40,5 x 7,2 mm | 500 pc(s). | 0,019 |
Sensor housing ACU 031 IP20 WH Accessories
- Mounting frame for wired MSensor G3 SFI 30 PIR 10DPI WH sensors allowing direct mounting to the ceiling
- Easy „click in“ installation of the sensor
- IP20
- 케이싱: 폴리카보네이트, 백색
- UV stabilized plastic
- MSensor G3 SFI 30 PIR 10DPI WH is powered via DALI circuit
- Mounting kit with screws and decorative plugs
- 0.5 mm² wiring for the sensor
- Two 3 x 1.5 mm² clamps with cable management (2 entry points on oppsite sides)
- Including gasket for ideal IP protection
- Casing passed glow wire test with 850 °C according to EN 61347-1
| Ordering data | |||
|---|---|---|---|
| 유형 | 품목 번호 | 패키징, 카턴 | 개당 무게 |
| Sensor housing ACU 031 IP20 WH | 28001874 | 81 pc(s). | 0,054 |
| CAD / RAY | ||
|---|---|---|
| 유형 | 품목 번호 | CAD Files |
| Sensor housing ACU 031 IP20 WH | 28001874 | CAD (449.1 KB) |
Sensor housing ACU 032 IP66 WH Accessories
- Mounting frame for wired MSensor G3 SFI 30 PIR 10DPI WH sensors allowing direct mounting to the ceiling
- Easy „click in“ installation of the sensor
- Housing provides IP 66, but in combination with the MSensor G3 SFI 30 PIR 4DPI WDA WH a maximum of IP54 is possible
- 케이싱: 폴리카보네이트, 백색
- UV stabilized plastic
- MSensor G3 SFI 30 PIR 10DPI WH is powered via DALI circuit
- Optional shutter for reduction of occupancy detection area allowing to decrease the occupancy detection area from 360° to 240°
- Mounting kit with screws and decorative plugs
- Including gasket for ideal IP protection
- Casing passed glow wire test with 850 °C according to EN 61347-1
| Ordering data | |||
|---|---|---|---|
| 유형 | 품목 번호 | 패키징, 카턴 | 개당 무게 |
| Sensor housing ACU 032 IP66 WH | 28001873 | 26 pc(s). | 0,105 |
| CAD / RAY | ||
|---|---|---|
| 유형 | 품목 번호 | CAD Files |
| Sensor housing ACU 032 IP66 WH | 28001873 | CAD (1.7 MB) |
Shading Set 4DPI WDA Accessories
- Shading set consisting of 3 different types of lenses: Corridor, 90° and 180° shutter
- Shutters mountable directly to the front of the sensor in 4 different positions 0°, 90°, 180° and 270° angle relative to the sensor device
- No disturbance of light measurement or IR receiver signals
- Material transparent Lexan 923 with polished surface finish
- Shutters made for one time use, once installed removal may damage the shutter and sensor lens!
| Ordering data | |||
|---|---|---|---|
| 유형 | 품목 번호 | 패키징, 카턴 | 개당 무게 |
| ACU SHADING SET 034 4DPI WDA | 28003867 | 20 pc(s). | 0,001 |
| CAD / RAY | ||
|---|---|---|
| 유형 | 품목 번호 | CAD Files |
| MSensor G3 SFI 30 PIR 4DPI WDA WH | 28003808 | CAD (646.7 KB) |