EM powerLED BASIC FX SC MH/NiCd 32 W
Combined emergency lighting LED Driver
- Combined emergency LED driver for manual testing
- For self-contained emergency lighting
- 클립온 스트레인 릴리프와 함께
빌트인 또는 독립형으로 사용
가능(액세서리 참조)
- 최대 출력 전력 32W
- EM = Emergency
- 공칭 수명 최대 100,000h
- 5 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)
- Adjustable output current between 350 and 700 mA via I-SELECT 2 plugs
- Protective features (overtemperature, short-circuit, overload, no-load, input voltage range)
- EN 50172에 따른 비상 탈출 조명
시스템용으로 적합
- 1 or 3 h rated duration depending on connected battery
- Constant power output in emergency mode
- Intelligent charge system
- Deep discharge protection
- Polarity reversal protection for battery
- Short-circuit-proof battery connection
- NiCd or NiMH batteries
- 4 year design life
- 2 years guarantee (conditions at https://www.tridonic.com/manufacturer-guarantee-conditions)
- For battery compatibility refer to data sheet, battery selection
정격 공급 전압 |
220 – 240 V |
AC 전압 범위 |
198 – 264 V |
주 전원 주파수 |
50 / 60 Hz |
과전압 보호 |
320 V (for 48 h) |
Typ. rated current (at 230 V, 50 Hz, full load, charging)
(1) |
178 mA |
최대 입력 전력 |
38,8 W |
Typ. efficiency (at 230 V, 50 Hz, full load, charging)
(1) |
84 % |
λ (at 230 V, 50 Hz, full load, charging) |
0,95 |
Typ. input current in no-load operation (charging) |
20 mA |
Typ. input power in no-load operation (charging) |
1,1 W |
In-rush current (peak / duration) |
4 A / 260 µs |
THD(230V, 50Hz, 전 부하에서) |
12,4 % |
시작 시간(230V, 50Hz, 전 부하에서) |
< 500 ms |
꺼지는 시간(230V, 50Hz, 전 부하에서) |
< 50 ms |
전환 시간(AC/EM) |
< 500 ms |
출력 전류 공차 |
< 5 % |
최대 출력 전류 피크(비반복) |
> 35 % |
출력 LF 전류 리플(< 120Hz) |
5 % |
U-OUT (including open- / short-circuit and double load) |
60 V |
Max. open circuit voltage |
60 V |
Mains voltage changeover threshold |
According to EN 60598-2-22 |
최대 케이싱 온도 tc |
80 °C |
Ambient temperature ta at ≤ 25 W
(2) |
-25 ... +50 / -25 ... +40 °C |
Ambient temperature ta at > 25 W
(2) |
-25 ... +45 / -25 ... +35 °C |
주 전원 서지 기능(L - N 사이) |
1,2 kV |
출력 측에서 서지 전압(PE에 대해) |
2,4 kV |
주 전원 서지 기능(L/N - PE 사이) |
2,4 kV |
수명 |
최대 100.000 h |
치수 L x W x H |
130 x 43 x 30 mm |
유형 |
Number of battery cells |
출력 전류
(1)
(2) |
Min. output voltage |
Max. output voltage |
최대 출력 전력 |
Typ. power consumption (at 230 V, 50 Hz) |
Typ. current consumption (at 230 V, 50 Hz) |
I-SELECT 저항기 값
(4) |
Min. load
(3) |
Max. load
(3) |
Min. load
(3) |
Max. load
(3) |
EM pLED BASIC FX 102 SC MH/NiCd 32W 50V
|
– |
350 mA |
15 V |
50 V |
17,5 W |
10,5 / 10,0 W |
23,5 / 23,0 W |
60 / 57 mA |
112 / 110 mA |
– |
EM pLED BASIC FX 102 SC MH/NiCd 32W 50V
|
– |
400 mA |
15 V |
50 V |
20,0 W |
11,5 / 11,0 W |
26,0 / 25,5 W |
65 / 62 mA |
126 / 125 mA |
12,40 kΩ |
EM pLED BASIC FX 102 SC MH/NiCd 32W 50V
|
– |
450 mA |
15 V |
50 V |
22,5 W |
12,5 / 12,0 W |
29,0 / 28,5 W |
68 / 65 mA |
137 / 135 mA |
11,00 kΩ |
EM pLED BASIC FX 102 SC MH/NiCd 32W 50V
|
– |
500 mA |
15 V |
50 V |
25,0 W |
13,5 / 13,0 W |
31,0 / 30,5 W |
72 / 70 mA |
147 / 145 mA |
10,00 kΩ |
EM pLED BASIC FX 102 SC MH/NiCd 32W 50V
|
– |
550 mA |
15 V |
50 V |
27,5 W |
14,0 / 13,5 W |
33,4 / 33,0 W |
75 / 70 mA |
160 / 155 mA |
9,09 kΩ |
EM pLED BASIC FX 102 SC MH/NiCd 32W 50V
|
– |
600 mA |
15 V |
50 V |
30,0 W |
15,0 / 14,5 W |
36,3 / 36,0 W |
80 / 75 mA |
170 / 165 mA |
8,25 kΩ |
EM pLED BASIC FX 102 SC MH/NiCd 32W 50V
|
– |
650 mA |
15 V |
50 V |
32,2 W |
15,5 / 15,0 W |
38,8 / 38,5 W |
83 / 80 mA |
176 / 174 mA |
7,68 kΩ |
EM pLED BASIC FX 102 SC MH/NiCd 32W 50V
|
– |
700 mA |
15 V |
46 V |
32,2 W |
16,5 / 16,0 W |
38,8 / 38,5 W |
85 / 83 mA |
178 / 176 mA |
0,00 kΩ |
EM pLED BASIC FX 102 SC MH/NiCd 32W 50V
|
1 |
– |
15 V |
50 V |
2,5 W |
– |
– |
– |
– |
– |
EM pLED BASIC FX 102 SC MH/NiCd 32W 50V
|
3 |
– |
15 V |
50 V |
2,5 W |
– |
– |
– |
– |
– |
I-SELECT 2 PLUG PRE / EXC
Accessories
- Ready-for-use resistor to set output current value
- Compatible with LED driver featuring I-select 2 interface; not compatible with I-SELECT (generation 1)
- Resistor is base insulated
- Resistor power 0.25 W
- Current tolerance ± 2 % additional to output current tolerance
- Compatible with LED driver series PRE and EXC
- R [kΩ] = 5 V / I_out [mA] x 1000
- E96 resistor value used
- Resistor value tolerance ≤ 1 %; resistor power ≥ 0.1 W; base insulation necessary
- When using a resistor value beyond the specified range, the output current will automatically be set to the minimum value
(resistor value too big), respectively to the maximum value (resistor value too small)
유형 |
품목 번호 |
색 |
마킹 |
전류 |
저항기 값 |
패키징, 백 |
개당 무게 |
I-SELECT 2 PLUG 350MA BL
|
28001110
|
청색 |
0350mA |
350mA |
14,30 kΩ |
10 pc(s). |
0,001 |
I-SELECT 2 PLUG 375MA BL
|
28001111
|
청색 |
0375mA |
375mA |
13,30 kΩ |
10 pc(s). |
0,001 |
I-SELECT 2 PLUG 400MA BL
|
28001112
|
청색 |
0400mA |
400mA |
12,40 kΩ |
10 pc(s). |
0,001 |
I-SELECT 2 PLUG 425MA BL
|
28001251
|
청색 |
0425mA |
425mA |
11,80 kΩ |
10 pc(s). |
0,001 |
I-SELECT 2 PLUG 450MA BL
|
28001113
|
청색 |
0450mA |
450mA |
11,00 kΩ |
10 pc(s). |
0,001 |
I-SELECT 2 PLUG 475MA BL
|
28001252
|
청색 |
0475mA |
475mA |
10,50 kΩ |
10 pc(s). |
0,001 |
I-SELECT 2 PLUG 500MA BL
|
28001114
|
청색 |
0500mA |
500mA |
10,00 kΩ |
10 pc(s). |
0,001 |
I-SELECT 2 PLUG 525MA BL
|
28001960
|
청색 |
0525mA |
525mA |
9,53 kΩ |
10 pc(s). |
0,001 |
I-SELECT 2 PLUG 550MA BL
|
28001115
|
청색 |
0550mA |
550mA |
9,09 kΩ |
10 pc(s). |
0,001 |
I-SELECT 2 PLUG 600MA BL
|
28001116
|
청색 |
0600mA |
600mA |
8,25 kΩ |
10 pc(s). |
0,001 |
I-SELECT 2 PLUG 650MA BL
|
28001117
|
청색 |
0650mA |
650mA |
7,68 kΩ |
10 pc(s). |
0,001 |
I-SELECT 2 PLUG 700MA BL
|
28001118
|
청색 |
0700mA |
700mA |
7,15 kΩ |
10 pc(s). |
0,001 |
I-SELECT 2 PLUG MAX BL
|
28001099
|
청색 |
최대 |
최대 |
0,00 kΩ |
10 pc(s). |
0,001 |
유형 |
품목 번호 |
CAD Files |
I-SELECT 2 PLUG 350MA BL
|
28001110
|
CAD
(712.6 KB)
|
I-SELECT 2 PLUG 375MA BL
|
28001111
|
CAD
(712.6 KB)
|
I-SELECT 2 PLUG 400MA BL
|
28001112
|
CAD
(712.6 KB)
|
I-SELECT 2 PLUG 425MA BL
|
28001251
|
CAD
(712.6 KB)
|
I-SELECT 2 PLUG 450MA BL
|
28001113
|
CAD
(712.6 KB)
|
I-SELECT 2 PLUG 475MA BL
|
28001252
|
CAD
(712.6 KB)
|
I-SELECT 2 PLUG 500MA BL
|
28001114
|
CAD
(712.6 KB)
|
I-SELECT 2 PLUG 525MA BL
|
28001960
|
CAD
(712.6 KB)
|
I-SELECT 2 PLUG 550MA BL
|
28001115
|
CAD
(712.6 KB)
|
I-SELECT 2 PLUG 600MA BL
|
28001116
|
CAD
(712.6 KB)
|
I-SELECT 2 PLUG 650MA BL
|
28001117
|
CAD
(712.6 KB)
|
I-SELECT 2 PLUG 700MA BL
|
28001118
|
CAD
(712.6 KB)
|
I-SELECT 2 PLUG MAX BL
|
28001099
|
CAD
(712.6 KB)
|
Prüftaster EM2
Accessories
- Approval marks:
-
- For connection to the emergency lighting unit
- For checking the device function
- Dielectric strength: 1,500 V AC for 60 seconds
유형 |
품목 번호 |
패키징, 백 |
패키징, 카턴 |
개당 무게 |
Test switch EM 2
|
89805277
|
25 pc(s). |
600 pc(s). |
0,009 |
유형 |
품목 번호 |
CAD Files |
Test switch EM 2
|
89805277
|
CAD
(1009.0 KB)
|
Statusanzeige grüne LED EM
Accessories
- Approval marks:
-
- A green LED indicates that charging current is flowing into the battery
유형 |
품목 번호 |
패키징, 백 |
패키징, 카턴 |
개당 무게 |
LED EM
|
89899605
|
25 pc(s). |
200 pc(s). |
0,011 |
LED EM
|
89899756
|
25 pc(s). |
200 pc(s). |
0,012 |
유형 |
품목 번호 |
CAD Files |
LED EM
|
89899605
|
CAD
(579.9 KB)
|
LED EM
|
89899756
|
CAD
(579.9 KB)
|
유형 |
품목 번호 |
CAT_EPD |
EM pLED BASIC FX 102 SC MH/NiCd 32W 50V
|
89800688
|
EPD
|